WiFi networks are less secure as compared to wired ones.
Therefore, WiFi security is a must. Once you are done with routerlogin.net setup, one of the primary things you typically wish to do is
hide your router’s WiFi network so that no unauthorized users enter your
network.
Here’s everything you need to know about hiding your
wireless network, including the top security tips. Let’s get the ball rolling.
Why do You Need to Hide Your WiFi Network?
In accordance with IEEE 802.11 standards, each WiFi
network includes an identifier that’s used by devices to connect to that
network. This identifier is known as Service Set Identifier or SSID. It is just
a fancy name of ‘network name’.
Around after every 100 milliseconds, routers transmit a
beacon frame, consisting of information about the network, including the SSID.
So the nearby WiFi-enabled devices find your network and connect to it.
So in order to prevent other devices from connecting to
your network, it is better to hide your wireless network.
Guide to Hide Your WiFi Network
Here is a step-by-step guide to hide your WiFi network
and prevent it from being seen.
Step-1: Make sure
that your WiFi router is turned on and receiving proper power supply from the
wall socket.
Step-2: Log in to
the admin panel of your router. The admin panel login process varies depending
upon the router manufacturer. For instance, Netgear users have to access the Netgear router login.
Note: It is worth
notable that you need an updated web browser to reach your router’s default
login portal.
Step-3: Once the
admin panel opens, it requires you to enter the username and password.
Step-4: Fill in
the required login credentials.
Step-5: As soon
as you are on the router’s dashboard, head over to the Wireless section.
Step-6: Now,
click on the Basic Settings option.
Step-7: Here, you
will be able to customize the router’s SSID, channel width as well as a channel
mode.
Step-8: Uncheck
the box next ‘Enabled SSID Broadcast’ option.
This option may also be called Enable Hidden Wireless,
Visibility Status, or simply SSID Broadcast, based on your router’s model.
That’s all! Don’t forget to save the settings before
leaving the web page. After that, you need to reconnect your WiFi devices to
the router’s network.
Security Tips for Your WiFi Network
Long story short, hiding your wireless network is not a
beneficial security measure. It only prevents neighboring devices from seeing
your WiFi network. Let’s have a look at the essential security measures you
must take for your wireless home network.
Encrypt using AES and WPA2
Keep in mind that your WiFi router is always transmitting
signals in all directions. However, you can encrypt these signals to make them
uninterceptable. This makes any signal intended for your computer only be
readable by it.
Change the Default Admin Details
A deep search on the internet can easily disclose the
default username and password you are using for your home WiFi router. In case
you don’t change them, all other security settings automatically become nil.
That’s why it is best to change the default Netgear Nighthawk login credentials
after the setup.
Disable the WPS and UPnP Features
These are convenience features that include several big
security vulnerabilities, e.g. the ability to avoid other security features.
Therefore, it is recommended you to turn off WPS and UPnP features as soon as
possible.
Also, ensure to create a strong password for your WiFi
network.
There were our security tips to safeguard your home
wireless network. Do you have any other tips? If yes, don’t forget to share
them with us via the comments section below.
0 Comments